Pinball

Partial

Stern1977stern.pinball.1977

Wire it up

what an authoring tool needs first
Bind this ROM
pinball

2 ROM sets resolve to this machine. Clones share the definition unless a hardware difference is listed.

Controller platform
Not determined
Displays

No display inventory recorded yet.

Address space
Switches
14–40 (13)
Solenoids
5–5 (1)
Lamps
10–60 (26)

Coverage

Partial

Real evidence exists, but authoring requirements are still missing or in conflict. Verify before shipping a table.

Completion13%

Progress is derived from the fixed author-readiness requirements. It helps rank unfinished work, but only a 100% author-ready definition passes the publication gate.

Catalog Identity
validated
Address Enumeration
unknown
Semantic Naming
unknown
Physical Wiring
unknown
Mechanisms
unknown
Variant Coverage
candidate
Recreation Knowledge
unknown
Still missing · 14
Driver MappingController PlatformInput EnumerationInput SemanticsOutput EnumerationOutput SemanticsDisplay InventoryMechanism InventoryMechanism BehaviorPolarityVariant DifferencesRecreation NotesProvenanceSpatial Placement

Switches

The addresses PinMAME reports as closed. Numbers are the public API values, not matrix hardware pins.

13 addresses

Switch map

Sequential addresses, grouped in columns of eight.

used unused
 
+0
+1
+2
+3
+4
+5
+6
+7
1–8
9–16
17–24
25–32
33–40
Hover or tap an address to identify it.
13 shown
# Name Device ID Evidence
14
Sw14a
switch.sw14a candidate
21
Sw21a
switch.sw21a candidate
22
Sw22a
switch.sw22a candidate
23
W23
switch.w23 candidate
24
W24
switch.w24 candidate
30
Sw30
switch.sw30 candidate
31
W31
switch.w31 candidate
32
W32
switch.w32 candidate
36
Right Sling Shot
switch.right-sling-shot candidate
37
Left Sling Shot
switch.left-sling-shot candidate
38
Bumper3
switch.bumper3 candidate
39
Bumper2
switch.bumper2 candidate
40
Bumper1
switch.bumper1 candidate

Controlled devices

Everything the ROM can energise, grouped the way a table author builds it.

Coils, magnets & motors

1
1 shown
# Name Device ID Evidence
5
Sol DT
coil.sol-dt candidate

Lamps

26

Lamp map

Sequential addresses, grouped in columns of eight.

used unused
 
+0
+1
+2
+3
+4
+5
+6
+7
1–8
9–16
17–24
25–32
33–40
41–48
49–56
57–64
Hover or tap an address to identify it.
26 shown
# Name Device ID Evidence
10
L10
lamp.l10 candidate
11
L11
lamp.l11 candidate
12
L12
lamp.l12 candidate
17
L17
lamp.l17 candidate
18
L18
lamp.l18 candidate
19
L19
lamp.l19 candidate
20
L20
lamp.l20 candidate
21
L21
lamp.l21 candidate
25
L25
lamp.l25 candidate
28
L28
lamp.l28 candidate
33
L33
lamp.l33 candidate
34
L34
lamp.l34 candidate
36
L36
lamp.l36 candidate
37
L37
lamp.l37 candidate
38
L38
lamp.l38 candidate
41
L41
lamp.l41 candidate
44
L44
lamp.l44 candidate
49
L49
lamp.l49 candidate
50
L50
lamp.l50 candidate
52
L52
lamp.l52 candidate
53
L53
lamp.l53 candidate
54
L54
lamp.l54 candidate
57
L57
lamp.l57 candidate
58
L58
lamp.l58 candidate
59
L59a
lamp.l59a candidate
60
L60
lamp.l60 candidate

Recreation notes

Working knowledge that has no schema field yet — edition differences, tuning values, pitfalls.

Coverage: partial - machine identity plus candidate-only I/O attachments. Playfield devices, wiring, mechanisms, and behavior are evidenced only as unverified candidates.

This record was promoted from the generated catalog stub stub.pinmame.pinball by the catalog-wide identity pass of 2026-08-29. The promotion resolves machine identity and carries the catalog's residual driver grouping over unchanged, the platform and device attachments below were added by the 2026-08-29/30 candidate passes and assert nothing beyond candidate provenance. Every requirement in the definition's coverage.missing is genuinely outstanding.

Identity

  • PinMAME catalog: root driver pinball, description "Pinball", manufacturer "Stern", catalog year "1977".
  • OPDB record GrZXj-Mq11k (IPDB 1792) names this machine "Pinball" (Stern Electronics, manufacture date 1977-01-08); the resolved identity rests on the agreement of the PinMAME catalog and this reviewed mapping.
  • The definition's driver list is exactly the clone tree PinMAME declares under pinball; whether every listed driver really runs on this physical machine is unverified.

Drivers this record holds

  • pinbalfp (1977, Stern, clone of pinball).
  • pinball (1977, Stern).

PinMAME source contract (candidate)

  • The pinned PinMAME source declares pinball at src/wpc/stgames.c:54 with machine module by35_mST100; no platform is declared (no reviewed profile covers that module yet).

VPX script candidates (candidate)

  • 1 retained community table script(s) declare this machine's driver; their extracted switch/lamp/solenoid/GI candidates are carried as 40 candidate devices. When curator work weighs sources, a retained script outranks emulator-derived candidates for runtime semantics, but every device here is still a candidate until a known-working table is verified against this exact physical machine.

What a curator must establish next

Controller platform from the pinned PinMAME driver source; full input, output, and display enumeration with semantic names; physical wiring and polarity; mechanism inventory and behavior; variant differences across the clone tree; recreation knowledge from a manual, schematic, or known-working table; runtime provenance; and a normalized spatial placement for every physical device. No manual, schematic, or runtime-harness evidence is retained for this machine yet; the candidate sections above are the only retained I/O evidence so far.

ROM sets

Every driver that resolves to this physical machine.

ROM set Description Year Parent Hardware
pinballPinball 1977
pinbalfpPinball (Free Play) 1977pinball

Parent set: pinball — clones share this definition unless a hardware difference is noted.

Pinball memory maps

External source LGPL-3.0-only2 maps

RAM layouts published by an independent project and mirrored here at a pinned commit. They are not part of this machine’s definition: nothing below was used as evidence for the definition, and none of it counts towards coverage. Check claims against the upstream project.

Commit
d8693b9

This program makes use of content from the Pinball Memory Maps project.

freeplay.map.json

stern-m100v4format 0.8

maps/stern/m100/freeplay.map.json

Applies to ROMs
pinbalfp
Also covers
draculfphothanfplectrofpmagicfpmemlanfpnugentfpprincefpstarsfpstingrfptridenfpwildfyfp
Sections
adjustmentsauditsgame_statehigh_scores

stern-m100 defines the RAM layout this map’s offsets are read against — the map is not interpretable without it.

generic.map.json

stern-m100v4format 0.8

maps/stern/m100/generic.map.json

Applies to ROMs
pinball
Also covers
draculahothandlectronomagicmemlanenugentprincessstarsstingraytridenttridentawildfyre
Sections
adjustmentsauditsgame_statehigh_scores

stern-m100 defines the RAM layout this map’s offsets are read against — the map is not interpretable without it.

Evidence

Every claim above traces to one of these. When they disagree: a known-working VPX script wins on controller addresses and causality, the manual wins on wiring and construction, pinned PinMAME wins on emulator routing and display layout.

  • PinMAME catalog

    BSD-3-Clause

    pinmame.catalog.8371478a7640

    PinmameGetGames

    by
    PinMAME contributors
    rev
    8371478a7640
  • VPX script

    vpx-script.66c9e73f67e1de70

    vpxtable-scripts: Pinball (Stern 1977).vbs

    by
    Authors credited in Pinball (Stern 1977).vbs and repository contributors
    rev
    0c036bb61b4b
    sha256
    66c9e73f67e1…

Something wrong or missing?

This definition still has 14 unmet requirements, listed under Coverage above. Fixes belong in the definition itself — editing on GitHub forks it for you and opens the pull request.

Cite a source for anything you change — a manual page, a line in a working VPX script, PinMAME source, or a reading from the machine's own service menu. Claims without provenance cannot be validated.