Elektra

Partial

Bally1981BY35bally.elektra.1981

Wire it up

what an authoring tool needs first
Bind this ROM
elektra

2 ROM sets resolve to this machine. Clones share the definition unless a hardware difference is listed.

Controller platform
pinmame.by35

PinMAME already reports logical active state. Do not invert again in the table — normally-closed is a physical fact recorded per switch, not a runtime transform.

Displays

No display inventory recorded yet.

Address space
Switches
1–40 (17)
Solenoids
6–18 (8)

Coverage

Partial

Real evidence exists, but authoring requirements are still missing or in conflict. Verify before shipping a table.

Completion19%

Progress is derived from the fixed author-readiness requirements. It helps rank unfinished work, but only a 100% author-ready definition passes the publication gate.

Catalog Identity
validated
Address Enumeration
unknown
Semantic Naming
unknown
Physical Wiring
unknown
Mechanisms
unknown
Variant Coverage
candidate
Recreation Knowledge
unknown
Still missing · 13
Driver MappingInput EnumerationInput SemanticsOutput EnumerationOutput SemanticsDisplay InventoryMechanism InventoryMechanism BehaviorPolarityVariant DifferencesRecreation NotesProvenanceSpatial Placement

Switches

The addresses PinMAME reports as closed. Numbers are the public API values, not matrix hardware pins.

17 addresses

Switch map

Sequential addresses, grouped in columns of eight.

used unused
 
+0
+1
+2
+3
+4
+5
+6
+7
1–8
9–16
17–24
25–32
33–40
Hover or tap an address to identify it.
17 shown
# Name Device ID Evidence
1
Slot
switch.slot candidate
2
Ball Release
switch.ball-release candidate
3
W03
switch.w03 candidate
4
W04
switch.w04 candidate
8
W08
switch.w08 candidate
12
W12
switch.w12 candidate
13
W13
switch.w13 candidate
14
W14
switch.w14 candidate
24
Sw24
switch.sw24 candidate
25
Spinner1
switch.spinner1 candidate
26
Sw26l
switch.sw26l candidate
27
Sw27a
switch.sw27a candidate
28
Sw28a
switch.sw28a candidate
32
Rubber Bandsw32a
switch.rubber-bandsw32a candidate
38
Sw38a
switch.sw38a candidate
39
Left Sling Shot
switch.left-sling-shot candidate
40
Right Sling Shot
switch.right-sling-shot candidate

Controlled devices

Everything the ROM can energise, grouped the way a table author builds it.

Coils, magnets & motors

8
8 shown
# Name Device ID Evidence
6
Sol Knocker
coil.sol-knocker candidate
7
Sol Outhole Kicker
coil.sol-outhole-kicker candidate
10
Sol Top Saucer
coil.sol-top-saucer candidate
11
Sol Right Saucer
coil.sol-right-saucer candidate
12
Sol DTDrop Up
coil.sol-dtdrop-up candidate
13
Sol Lower Saucer
coil.sol-lower-saucer candidate
17
Sol Gate Diverter
coil.sol-gate-diverter candidate
18
Sol BGGI
coil.sol-bggi candidate

Recreation notes

Working knowledge that has no schema field yet — edition differences, tuning values, pitfalls.

Coverage: partial - machine identity plus candidate-only I/O attachments. Playfield devices, wiring, mechanisms, and behavior are evidenced only as unverified candidates.

This record was promoted from the generated catalog stub stub.pinmame.elektra by the catalog-wide identity pass of 2026-08-29. The promotion resolves machine identity and carries the catalog's residual driver grouping over unchanged, the platform and device attachments below were added by the 2026-08-29/30 candidate passes and assert nothing beyond candidate provenance. Every requirement in the definition's coverage.missing is genuinely outstanding.

Identity

  • PinMAME catalog: root driver elektra, description "Elektra", manufacturer "Bally", catalog year "1981".
  • OPDB record GRVld-MDE3l (IPDB 778) names this machine "Elektra" (Bally, manufacture date 1981-03-24); the resolved identity rests on the agreement of the PinMAME catalog and this reviewed mapping.
  • The definition's driver list is exactly the clone tree PinMAME declares under elektra; whether every listed driver really runs on this physical machine is unverified.

Drivers this record holds

  • elektra (1981, Bally).
  • elektraa (2004, Bally / Oliver, clone of elektra).

PinMAME source contract (candidate)

  • The pinned PinMAME source declares elektra at src/wpc/by35games.c:1396 with machine module by35_mBY35_61S; the definition declares controller platform pinmame.by35 from it.

VPX script candidates (candidate)

  • 1 retained community table script(s) declare this machine's driver; their extracted switch/lamp/solenoid/GI candidates are carried as 25 candidate devices. When curator work weighs sources, a retained script outranks emulator-derived candidates for runtime semantics, but every device here is still a candidate until a known-working table is verified against this exact physical machine.

What a curator must establish next

Full input, output, and display enumeration with semantic names; physical wiring and polarity; mechanism inventory and behavior; variant differences across the clone tree; recreation knowledge from a manual, schematic, or known-working table; runtime provenance; and a normalized spatial placement for every physical device. No manual, schematic, or runtime-harness evidence is retained for this machine yet; the candidate sections above are the only retained I/O evidence so far.

ROM sets

Every driver that resolves to this physical machine.

ROM set Description Year Parent Hardware
elektraaElektra (Free Play) 2004elektra
elektraElektra 1981

Parent set: elektra — clones share this definition unless a hardware difference is noted.

Pinball memory maps

External source LGPL-3.0-only2 maps

RAM layouts published by an independent project and mirrored here at a pinned commit. They are not part of this machine’s definition: nothing below was used as evidence for the definition, and none of it counts towards coverage. Check claims against the upstream project.

Commit
d8693b9

This program makes use of content from the Pinball Memory Maps project.

system-rom-53-freeplay.map.json

bally-35-8Kv3format 0.8

maps/bally/as-2518-35/system-rom-53-freeplay.map.json

Applies to ROMs
elektraa
Also covers
bmxacybrnauafathomafbclassakosteelam_mpacamedusaaspyhuntavectoraxsandosa
Sections
adjustmentsauditsgame_statehigh_scores

bally-35-8K defines the RAM layout this map’s offsets are read against — the map is not interpretable without it.

system-rom-53.map.json

bally-35-8Kv4format 0.8

maps/bally/as-2518-35/system-rom-53.map.json

Applies to ROMs
elektra
Also covers
bmxcybrnautfathomfbclasskosteelm_mpacm_mpacbmedusamedusafspyhuntrvectorxsandos
Sections
adjustmentsauditsgame_statehigh_scores

bally-35-8K defines the RAM layout this map’s offsets are read against — the map is not interpretable without it.

Evidence

Every claim above traces to one of these. When they disagree: a known-working VPX script wins on controller addresses and causality, the manual wins on wiring and construction, pinned PinMAME wins on emulator routing and display layout.

  • PinMAME catalog

    BSD-3-Clause

    pinmame.catalog.8371478a7640

    PinmameGetGames

    by
    PinMAME contributors
    rev
    8371478a7640
  • PinMAME source

    BSD-3-Clause

    pinmame.core.8371478a7640

    src/wpc/by35games.c:1396 (machine module by35_mBY35_61S)

    by
    PinMAME contributors
    rev
    8371478a7640
  • VPX script

    vpx-script.d418424c6fd27be3

    vpx-standalone-scripts: Elektra (Bally 1981) w VR Room v2.0.7/Elektra (Bally 1981) w VR Room v2.0.7.vbs

    by
    Authors credited in Elektra (Bally 1981) w VR Room v2.0.7/Elektra (Bally 1981) w VR Room v2.0.7.vbs and repository contributors
    rev
    15d112648a1b
    sha256
    d418424c6fd2…

Something wrong or missing?

This definition still has 13 unmet requirements, listed under Coverage above. Fixes belong in the definition itself — editing on GitHub forks it for you and opens the pull request.

Cite a source for anything you change — a manual page, a line in a working VPX script, PinMAME source, or a reading from the machine's own service menu. Claims without provenance cannot be validated.

Same platform